The Biggest Problem With Double Glazing Lock Repairs And What You Can Do To Fix It
Double Glazing Lock Repairs
The best locks for your doors and windows can stop burglars from gaining entry into your home. They usually don't want to break glass or try to squeeze through windows.
Some double glazing owners, however, have experienced problems with their window or door lock following the installation. These issues can be solved without the need for a new double glazing.
Broken or faulty locks
A locksmith can repair your uPVC window lock or door lock if it's damaged or is not working properly. They will be able to fix the hinges, striker plates and locks on your double-glazed. They can also move the cylinder around to fix any misalignment problems that could be causing your handle to not operate properly.
The mechanism could be seized when the key is inserted into the lock, but it will not turn or become difficult to insert. The dirt or grease could be trapped in the mechanism. If this is the case it could be possible for the lock to be cleaned and lubricated. It is important to apply a dry lubricant like graphite or teflon instead of oil which attracts dirt and stick to the inside of the mechanism. After you have lubricated the lock, you should insert the key and then try to turn it. The lubricant will work through the mechanism, and the lock should be able turn without difficulty.
A damaged lock can be caused by loose screws inside the mechanism of the lock. They can loosen and fall out or break completely and stop the lock from working properly. The screws can be tightened with a screwdriver, but you must be careful not to over tighten them. This could damage the internal components.
A broken lock can be dangerous for you and your family members especially if you have small children. They can open the door without your knowledge which gives them access to your house. If you're worried about this happening, then a vetted locksmith can provide a quick and efficient service to secure your double glazing doors.
Misty Glaze are a professional uPVC and double glazing business in Lancing, who can repair any type of defective and broken mechanisms, handles, cylinders and lock systems on both uPVC windows and doors. We can also alter your uPVC or double glazing locking system to meet your particular requirements, meaning that in most cases, replacement windows and doors are not necessary.
Handles that are broken or are damaged
As part of their overall security plan, most double-glazed windows feature a multipoint lock. This is an excellent option for those concerned with potential thieves who may try to gain access to your home. It's also worth asking your installer about anti-lift blocks that can be installed in addition to the existing locks and will keep your window locked in the closed position.
It's not uncommon for handle locks to become damaged or fail. They are the first part of your window that could be pushed open by criminals intent on breaking into. The good news is that this is one of the easiest parts to repair.
Modern handles made of aluminium and uPVC operate a multi-point locking system known as Espagnolette which is designed to withstand forced entry. This security upgrade is available as an option for new uPVC windows. As an alternative upgrade, older style uPVC or aluminium handles that are no longer in use can be upgraded to shoot bolt locking systems.
It is crucial to fix a handle as soon as you can if it's damaged. Faulty handles may prevent the window from closing properly and allow drafts to enter. It could also be a weak point that burglars who are opportunistic might exploit, putting your family and belongings at risk of being stolen.
To repair the broken mechanism, you first need to gain access to the window frame and then remove the damaged handle. The gearbox is then opened to identify the type of gearbox that is used to open the handle. This will allow an alternative that is compatible with the profile and internal window frame mechanisms.
After the mechanism has been replaced, the handle can be fixed using the original screws however, we usually recommend replacing them with larger ones as this will give the most secure fit. The final step is to seal the handle using an opaque sealant. This will shield it from further corrosion. Once you've completed this step your window will be functioning again at a fraction of the cost of replacing it.
Hinges that are broken or damaged
If your windows don't close correctly, draughts may enter your home, the security barriers will become weaker, and there is the risk of water damage or damp. Broken or faulty window hinges are a frequent problem that can be fixed easily.
If your uPVC windows don't open or shut, it is likely that hinges need to be repaired or replaced. While most window manufacturers require you to purchase a whole new window unit to fix this simple problem We can replace the damaged hinges and save you money.
Window hinges can often break due to repeated use or might be damaged through rust over time. If you've got a broken window hinge, it is important to take precautions to avoid further damage. This means not causing the window to open or close.
You can locate the appropriate parts for your hinge by identifying its model. The most common kinds of window hinges include Maco, Mila, Roto and many other brands. It is recommended to speak with a professional in this case so that you don't make the mistake of buying parts that are not compatible with your current hardware and could cause further damage.
Faulty hinges are a major issue for uPVC doors and windows. They can be the main source of noise and can also allow water to enter your windows.
Verify whether the pin barrels on both hinge halves are aligned. If it's not, tap the headpin with a hammer in order to create a slight bend in the hinge barrel. This will help keep the pin in place. Ask a friend to hold the doors as you take out hinge screws and hinges. Replace the hinges with ones that are of the same size, and install the screws with glue. Finally, while the glue is drying, put a secure hold on the hinges with weights or clamps.
After your hinges have been repaired, you should be able to re-install the door and then reattach the handle. It is recommended to replace the screws using the same length of dowels as the original screw so that they match up with each one.
Glass that is damaged or is damaged
While uPVC windows do a great job of keeping the cold out and warm in, they may become damaged over time. This can include broken or damaged glass as well as defective locks. If not taken care of, it can be a costly problem. This can also detract from the aesthetics of your home and result in a decrease in insulation. It is crucial to fix any damage as soon as it occurs.
If the glass is cracked but not shattered it is usually possible to repair it yourself using the appropriate tools and methods. Be sure that the area around the glass that has been broken is free of debris to ensure that shards do not cause injury or cause a trip hazard. After that, take away the broken glass pieces and dispose of them in a proper manner. Then, place masking tape over the entire area to prevent shards from scattering and sticking to your skin when you move them. Making sure the glass pane is fitted prior to applying glue is an ideal option when you have windows that have two panes. This will ensure you have enough room to finish your project.
Before applying the glue clean the surface of the damaged frame and the glass with an unclean, dry cloth. Follow the curing and application instructions that may differ from product-to-product. window repairs Willenhall may have to clamp the broken glass with lightweight clamps designed to support fragile materials, based on the angle.
After the adhesive has fully set, carefully place the glass into the window frame, making sure it's flush with the edge of the frame and that there are no gaps between the glass and the window sash. Be careful not to bend the window when it's being reinstalled, as this can weaken the seal and cause water infiltration and condensation.
If you have a glass window that is completely shattered or has larger cracks, contact a professional glazier such as O'Brien(r) to organise a replacement. It's essential to act swiftly when you notice broken glass.